Fast Termination series keystone jack , Shielded, Category 6A

Order table

P/N Cat. Type. Individual package Collective package Freight package To compare Add to cart
Volume, m3 Weight, kg Quantity Dimensions, mm Weight, kg Quantity Dimensions, mm Weight, kg
NMC-KJSA2-FT-MT 6A Shielded. 0.000069 0.022 150 pcs. 250x190x210 3.4 600 pcs. 515x400x230 14.4


NIKOMAX Fast Termination jacks («FT» series) are speci cally designed for use with a quick termination tool (NMC-FT-TOOL). All you need is to spread the cable to the module contacts, insert it into the tool and simply squeeze the handles. The accurate and high-quality termination in just a single click! The IDC contacts of FT jack are also compatible with punch down tool with 110/KRONE knife. The jacks are fully compatible with all NIKOMAX components. Only 17 mm width and a standard height allows you to install them in any snap-in patch panels, including high density models with 0.5U height. NMC-KJSA2-FT-MT (Cat.6A), are made in fully shielded, zinc-aluminum alloy housing. After install, a shielded cable will be safely locked between a strain relief on the jack cover and a clip from the bottom, providing a full grounding with good electrical contact with the jack body. On the strain relief there is also a mount for the grounding wire.

Key features

Spring-loaded clamps for reliable contact with the patch cord screen

The unique design of the contact part, designed for fast cable termination with the NMC-FT-TOOL tool. The contacts are also compatible with the punch down tools with 110 / Krone knives (110 type knives are recommended) To improve the ease of installation, the contact blades are provided with slots that hold the wires in the wiring process

Fully shielded version, die-cast zinc-aluminum alloy housing

Additional marking of the category on the back of the module for easy handling of patch panels

Contacts with 50 micro-inches gold plating, at least 750 connection cycles Special design minimizes crosstalk in the connector (for categories 6 and 6A)

Additional clip for securing and grounding the cable

The insulating protective cover, which additionally holds the conductors in the IDC contacts and eliminates the possibility of contact of the lead wires with the module housing

Compact size allows you to install modules in 24-port dial-up patch panels, including 0.5U

With the ability to connect the ground wire




Bandwidth, MHz


Connection style

Fully shielded


Exceeds the requirements of the standards: ISO / IEC 11801, EN 50173 and ANSI / TIA -568-C.2

Supported applications

10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 10G-BASE-T (For Cat. 6 & 6А),
ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive

Temperature ranges

Storage from -40 to +70 ° C. Installation from 0 to +50 ° C. Operation from -10 to +60 ° C


5 years - extended; 25 years - as part of the certified NIKOMAX SCS

Connector type


Connector material in connector

Phosphor bronze

Contact coating material

Gold (50 micro-inches) over nickel (100 micro-inches)

Number of cable connections

Not less than 750

Type of IDC contacts (seal)

FT-TOOL fast-termination tool or 110 / KRONE knives

Layout diagram


IDC Contact material

Phosphor bronze

IDC coating material

Tin (100 micro-inches)

Plastic material

High-strength, non-flammable, compliant to UL94V-0


Patch panels, surface mount box, faceplate


Metallic (nickel)

Insulation resistance

At least 500 MΩ (at a constant voltage of 100 V)

Maximum load-bearing capacity

Up to 1000 V, 60 Hz for 1 minute

Contact resistance, μΩ

Not more than 20

IDC Contact resistance, μΩ

Not more than 2.5

Permissible diameter of conductors

~24-22 AWG (0.50-0.65 mm)



Housing material

Zinc-aluminum alloy

Dimensions (WxHxD), mm



Individual - Plastic bag

Basic equipment

Module 1
Protective cover 1
Insulating cover 1
Grounding wire 1
Cable tie 1
Installation instructions 1