Fast Termination series keystone jack, Unshielded, Category 5e

Order table

P/N Cat. Type. Individual package Collective package Freight package To compare Add to cart
Volume, m3 Weight, kg Quantity Dimensions, mm Weight, kg Quantity Dimensions, mm Weight, kg
NMC-KJUD2-ST-WT 5e Unshielded. 0.000068 0.010 150 pcs. 250x190x210x 1.8 600 pcs. 515x400x230 7.8


NIKOMAX Fast Termination jacks with build-in shutter («ST» series) are speci cally designed for use with a quick termination tool (NMC-FT-TOOL). All you need is to spread the cable to the module contacts, insert it into the tool and simply squeeze the handles. The accurate and high-quality termination in just a single click! The IDC contacts of FT jack are also compatible with punch down tool with 110/KRONE knife. The jacks are fully compatible with all NIKOMAX components. Only 17 mm width and a standard height allows you to install them in any snap-in patch panels, including high density models with 0.5U height. The ST jacks have a built-in shutter, which protects the socket from dust. Shutter goes inside the unit when connecting patch cord. NMC-KJUD2-ST-WT (CAT.5e) are made from durable plastic, making them ideal for the unshielded systems.

Key features

The unique design of the contact part, designed for fast cable termination with the NMC-FT-TOOL tool. The contacts are also compatible with the percussion tool with 110 / Krone knives (110 type knives are recommended) To improve the ease of installation, the contact blades are provided with slots that hold the wires in the wiring process

The built-in anti-dust shutter protects the connector from dirt and is freely embedded inside the module when connecting the patch cord Contacts with 50 micro-inches gold plating. At least 750 connection cycles. Special design minimizes crosstalk in the connector (for category 6)

Additional marking of the category on the back of the module for easy handling of patch panels

Protective cover fixes conductors in IDC contacts

Compact size allows you to install modules in 24-port dial-up patch panels, including 0.5U




Bandwidth, MHz


Connection style



Exceeds the requirements of the standards: ISO / IEC 11801, EN 50173 and ANSI / TIA -568-C.2

Supported applications

10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 10G-BASE-T (For Cat. 6 & 6А),
ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive

Temperature ranges

Storage from -40 to +70 ° C. Installation from 0 to +50 ° C. Operation from -10 to +60 ° C


5 years - extended; 25 years - as part of the certified NIKOMAX SCS

Connector type


Connector material in connector

Phosphor bronze

Contact coating material

Gold (50 micro-inches) over nickel (100 micro-inches)

Number of cable connections

Not less than 750

Type of IDC contacts (seal)

FT-TOOL fast-termination tool or 110 / KRONE knives

Layout diagram


IDC Contact material

Phosphor bronze

IDC coating material

Tin (100 micro-inches)


Patch panels, surface mount box, faceplate



Insulation resistance

At least 500 MΩ (at a constant voltage of 100 V)

Maximum load-bearing capacity

Up to 1000 V, 60 Hz for 1 minute

Contact resistance, μΩ

Not more than 20

IDC Contact resistance, μΩ

Not more than 2.5

Permissible diameter of conductors

~24-22 AWG (0.50-0.65 mm)



Housing material

High-strength non-flammable plastic, meets UL94V-0

Dimensions (WxHxD), mm



Individual - Plastic bag

Basic equipment

Module 1
Protective cover 1
Installation instructions 1