Keystone jack with dust cover, Unshielded, Category 6

Order table

P/N Cat. Type. Individual package Collective package Freight package To compare Add to cart
Volume, m3 Weight, kg Quantity Dimensions, mm Weight, kg Quantity Dimensions, mm Weight, kg
NMC-KJUE2-WT 6 Unshielded. 0.000068 0.008 100 pcs. 190х160х280 1.10 600 pcs. 585x280x345 7.7


Keystone jacks are designed for installation in faceplates, surface mounting boxes and modular patch panels. Keystone jacks are widely used for connection workplaces to local network. NMC-KJUE2-WT (CAT.6) keystone jacks are made from durable plastic in unshielded housing. IDC offer two wiring standards: T568A/B. All modules are made in the same design and fully compatible with all NIKOMAX components. Only 17 mm width and a standard height allows you to install them in any snap-in patch panels, including high density models with 0.5U height. Jacks require a punchdown tool with 110/KRONE blades for termination.

Key features

Removable dust cover prevents dust from settling on the connector pins if the module is installed in an open socket or patch panel The kit includes 3 covers with different labels

Contacts with 50 micro-inches gold plating At least 750 connection cycles

Isolating protective cover, which additionally holds the conductors in the IDC contacts

Compact size allows you to install modules in 24-port dial-up patch panels, including 0.5U




Bandwidth, MHz


Connection style



Exceeds the requirements of the standards: ISO / IEC 11801, EN 50173 and ANSI / TIA-568-C.2

Supported applications

10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, ATM-25, ATM-51,
ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive

Temperature ranges

Storage from -40 to +70 ° C. Installation from 0 to +50 ° C. Operation from -10 to +60 ° C


5 years - extended; 25 years - as part of the certified NIKOMAX SCS

Connector type


Connector material in connector

Phosphor bronze

Contact coating material

Gold (50 micro-inches) over nickel (100 micro-inches)

Number of cable connections

Not less than 750

Type of IDC contacts (seal)

For terminating with a punch down tool with knives 110 / KRONE

Layout diagram


IDC Contact material

Phosphor bronze

Plastic material

High-strength, non-flammable, meets UL94V-0


Patch panels, surface mount box, faceplate


Case - White, IDC zone and cover - Black

Insulation resistance

At least 500 MΩ (at a constant voltage of 100 V)

Maximum load-bearing capacity

Up to 1000 V, 60 Hz for 1 minute

Contact resistance, μΩ

Not more than 20

IDC Contact resistance, μΩ

Not more than 2.5

Permissible diameter of conductors

~24-22 AWG (0.50-0.65 mm)



Dimensions (WxHxD), mm



Individual - Plastic bag

Basic equipment

Module 1
Protective cover 1
Dust cover 1