Shielded patch panel, 24 ports, 19 ", 1U, Category 5e

Order table

P/N Cat. Number of ports Height, U Individual package Freight package To compare Add to cart
Dimensions, mm Weight, kg Quantity Dimensions, mm Weight, kg
NMC-RP24SD2-1U-MT 5e 24 1 510x110x80 1.44 10 pcs. 515x375x240 16.9


Shielded Patch Panels are designed for connecting different SCS subsystems and network equipment to each other with patch cords. NIKOMAX NMC-RP24SA2-1U-MT (Cat. 6A), NMC-RP24SE2-1U-MT (Cat.6) and NMC-RP24SD2-1U-MT (CAT5) patch panels are made in stainless steel, fully shielded enclosures. They are designed for installation in 19 ‘‘ cabinets and racks. The panels have a standard height of 1U and can accommodate 24 port RJ45 / 8P8C. Universal IDC contacts for 110 / KRONE type knives are located on the rear side of panels . There are two wiring standards: T568 A and B. Shielded cable are grounded in pairs on the screw terminals. The cassette provided the 9th ground to IDC-contact - speci cally for the drain wire of the cable which both sides of the PCB have a common ground bus. For better shielding against electromagnetic interference and improve communication with unpainted rails cabinet, steel body panels are galvanized with nickel. A built-in organizer for secure fastening of cables.

Key features

Contacts with 50 micro-inches gold plating: not less than 750 connecting cycles. The design of the contact minimizes crosstalk in the connector (for Cat.6 and 6A) The spring-loaded clips on the sides of the socket ensure reliable contact with the patch cord shielding

Fully shielded version, nickel-plated housing

All ports are numbered

There are additional areas for marking

Color scheme of wiring according to two standards: T568 A and B

Universal IDC contacts for 110 / Krone (it is recommended to use 110 type knives) To improve the convenience of terminating, the contact blades are provided with slits that firmly hold the wires in the wiring process

Built-in cable organizer

Grounding wire for grounding to the common rail of the cabinet

The common ground bus and screw terminals for the best electrical connection to the panel housing

9th IDC contact specially for grounding drain cable conductor




Bandwidth, MHz


Diameter of conductors, AWG

~24-22 AWG (0.50-0.65 mm)

Connection style

Fully shielded


Exceeds the requirements of the standards: ISO / IEC 11801, EN 50173 and ANSI / TIA -568-C.2

Supported applications

10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 10G-BASE-T (For Cat. 6),
ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive

Temperature ranges

Storage -40 to +70 ° C. Installation 0 to +50 ° C. Operating -10 to +60 ° C

Individual packing

Cardboard box


5 years - extended; 25 years - as part of the NIKOMAX SCS certified

Number of ports


Height, U


Connector type


Connector material in connector

Phosphor bronze

Contact coating material

Gold (50 micro-inches) over nickel (100 micro-inches)

Number of cable connections

Not less than 750

Type of IDC contacts (seal)


Layout diagram


IDC Contact material

Phosphor bronze

IDC coating material

Tin (100 micro-inches)

Plastic material

High-strength, non- fammable, meets UL94V-0


All ports are numbered, there are additional labeling area


19" Cabinet or rack

Depth in rack, mm


Material of the supporting structure

Galvanized steel: body - 1.5mm; cover - 1 mm.


Metallic (Nickel)

Insulation resistance

Not less than 500 M ohms (at constant voltage of 100 V)

Maximum load-bearing capacity

Up to 1000 V, 60 Hz for 1 minute

Contact resistance, μΩ

Not more than 20

IDC Contact resistance, μΩ

Not more than 2.5

Basic equipment

Patch panel 1
Cable tie 24
Grounding wire 1
Screw-washer-nut 4
Installations Instructions 1