Unshielded patch panel, 24 ports, 19", 1U, Category 6a


Unshielded Patch Panels are designed for connecting different SCS subsystems and network equipment to each other with patch cords. NIKOMAX unshielded patch panel are in black and are intended for installation in a 19’’ cabinet or rack. • NIKOMAX NMC-RP24UA2-1U-BK (Cat.6a), NMC-RP24UE2-1U-BK (Cat.6) and NMC-RP24UD2-1U-BK (Cat.5e) have a standard height of 1U and accommodates 24 ports RJ45 / 8P8C. • NIKOMAX NMC-RP48UE2-2U-BK (Cat.6) and NMC-RP48UD2-2U-BK (Cat.5e) is a version of 2U, 48-port RJ45 / 8P8C and are more cost-effective solution. On the back of the patch panels are contacts for 110 type knives and are color coded on two standards: T568 A and B. A special contact design also allows for terminating cables by KRONE-type knives. For ease of administration, all ports are numbered, and there are additional areas for labeling. The patch panels offer convenient detachable organizers for routing incoming cables. For administrative convenience, it is also recommended for every 48-port patch panels additionally put organizer for stacking patch cords.

Key features

Universal IDC contacts 110 / Krone (it is recommended to use 110 type knives) To improve the convenience of sealing, the contact blades are provided with slits that firmly hold the wires in the wiring process

All ports are numbered. There are additional marking areas with convenient hinged covers

Contacts with50 micro-inches gold plating: not less than 750 connecting cycles. The design of the tracks minimizes crosstalk in the connector (for Cat.6)

IDC contacts are compatible with 110 type knife and the NMC-315DR tool with a nozzle for simultaneous terminating of 4 pairs

Removable cable organizer included

Color scheme of wiring according to two standards: T568 A and B




Bandwidth, MHz


Connection style



Exceeds the requirements of the standards: ISO / IEC 11801, EN 50173 and ANSI / TIA-568-C.2

Supported applications

10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 10G-BASE-T,
ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive

Temperature ranges

Storage -40 to +70 ° C. Installation 0 to +50 ° C. Operating -10 to +60 ° C

Individual packing

Cardboard box


5 years - extended; 25 years - as part of the NIKOMAX SCS certified

Number of ports


Height, U


Connector type


Connector material in connector

Phosphor bronze

Contact coating material

Gold (50 micro-inches) over nickel (100 micro-inches)

Number of cable connections

Not less than 750

Type of IDC contacts (seal)


Layout diagram


IDC Contact material

Phosphor bronze

IDC coating material

Tin (100 micro-inches)

Plastic material

High-strength, non-flammable, meets UL94V-0


All ports are numbered, there are additional marking areas


19’’ Cabinet or rack

Material of the supporting structure

Steel 1.5 mm



Insulation resistance

Not less than 500 M ohms (at constant voltage of 100 V)

Maximum load-bearing capacity

Up to 1000 V, 60 Hz for 1 minute

Contact resistance, μΩ

Not more than 20

Contact resistance, μΩ

Not more than 2.5

Permissible diameter of conductors

~24-22 AWG (0.50-0.65 mm)

Depth in rack, without / with organizer, mm


Basic equipment

Patch panel 1
Cable organizer 1
Cable tie 24
Screw-washer-nut 4
Installation Instructions 1