NMC-RP24UD2-AN-1U-BK
Unshielded patch panel with angled ports, 24 ports, 19 ", 1U, Category 5e
NMC-RP24UD2-AN-1U-BK, Cat.5e
NMC-RP24UD2-AN-1U-BK, Cat.5e
Order table
P/N | Cat. | Number of ports | Height, U | Individual package | Freight package | To compare | Add to cart | |||
---|---|---|---|---|---|---|---|---|---|---|
Dimensions, mm | Weight, kg | Quantity | Dimensions, mm | Weight, kg | ||||||
NMC-RP24UD2-AN-1U-BK | 5e | 24 | 1 | 510x80x60 | 0.91 | 15 pcs. | 515x375x240 | 16.4 |
|
|
Description
Key features

Universal IDC contacts 110 / Krone (it is recommended to use 110 type knives) To improve the convenience of terminating, the contact blades are provided with slits that firmly hold the wires in the wiring process

Contacts with 50 micro-inches gold plating: not less than 750 connecting cycles. The design of the tracks minimizes crosstalk in the connector (for Cat.6) RJ45 ports, angled, allow you to output patch cords to the sides and fasten them to vertical cable organizers, saving space in the cabinet

All ports are numbered

IDC contacts are compatible with 110 type knife and the NMC-315DR tool with a nozzle for simultaneous sealing of 4 pairs

Removable cable organizer included

Color scheme of wiring according to two standards: T568 A and B

There are additional areas for marking
Characteristics
Category |
5e |
Bandwidth, MHz |
100 |
Connection style |
Unshielded |
Compliance |
Exceeds the requirements of the standards: ISO / IEC 11801, EN 50173 and ANSI / TIA -568-C.2 |
Supported applications |
10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 10G-BASE-T (For Cat. 6), |
Temperature ranges |
Storage from -40 to +70 ° C. Installation from 0 to +50 ° C. Operation from -10 to +60 ° C |
Individual packing |
Cardboard box |
Warranty |
5 years - extended; 25 years - as part of the NIKOMAX SCS certified |
Number of ports |
24 |
Height, U |
1 |
Connector type |
RJ45/8P8C |
Connector material in connector |
Phosphor bronze |
Contact coating material |
Gold (50 micro-inches) over nickel (100 micro-inches) |
Number of cable connections |
Not less than 750 |
Type of IDC contacts (seal) |
110/KRONE |
Layout diagram |
T568A/B |
IDC Contact material |
Phosphor bronze |
IDC coating material |
Tin (100 micro-inches) |
Plastic material |
High-strength, non-flammable, meets UL94V-0 |
Marking |
All ports are numbered, there are additional labeling area |
Installation |
19’’ Cabinet or rack |
Material of the supporting structure |
Steel 1.5 mm |
Color |
Black |
Insulation resistance |
Not less than 500 M ohms (at constant voltage of 100 V) |
Maximum load-bearing capacity |
Up to 1000 V, 60 Hz for 1 minute |
Contact resistance, μΩ |
Not more than 20 |
Contact resistance, μΩ |
Not more than 2.5 |
Permissible diameter of conductors |
~24-22 AWG (0.50-0.65 mm) |
Depth in rack, without / with organizer, mm |
30/80 |
Basic equipment
Patch panel | 1 | |
Cable organizer | 1 | |
Cable tie | 24 | |
Screw-washer-nut | 4 | |
Installation Instructions | 1 |