Unshielded patch panel, 48 ports, 19 ", 1U, category 6, with cable management, black

Order table

P/N Cat. Number of ports Height, U Individual package Freight package To compare Add to cart
Dimensions, mm Weight, kg Quantity Dimensions, mm Weight, kg
NMC-RP48UE2-1U-BK 6 48 1 512 x 77 x 57 - - 500 x 400 x 230 -


Unshielded Patch Panels are designed for connecting different SCS subsystems and network equipment to each other with patch cords. NIKOMAX unshielded patch panel are in black and are intended for installation in a 19’’ cabinet or rack. NIKOMAX NMC-RP48UE2-1U-BK (Cat.6), high-density panels with unshielded housings are intended for installation in 19’’ cabinets and racks. The panel contain 48 port RJ45/8P8C at a standatd height of 1U only. This solution is ideal when it is necessary to provide a high density port (e.g., data centers) or to extend the network in the limited space of the cabinet. On the back of the patch panels there are 110 type contacts with color marking according to two standards: T568 A and B. The special design of the contacts allows the use of type knives for cable termination KRONE: For ease of administration, all ports are numbered, as well as additional marking pads, protective covers are included to protect cable connections and IDC contacts, and a removable organizer is provided for secure cable management.


Wiring diagram


Maximum load-bearing capacity

Up to 1000 V, 60 Hz for 1 minute





Bandwidth, MHz


Connection style



ISO/IEC 11801, EN 50173, TIA/EIA-568

IDC Contact resistance, μΩ

Not more than 2.5

Supported applications

10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 10G-BASE-T (55M for Cat. 6), ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive

Temperature ranges

Storage -40 to +70 ° C. Installation 0 to +50 ° C. Operating -10 to +60 ° C

Individual packing

Cardboard box


5 years - extended; 25 years - as part of the NIKOMAX SCS certified

Permissible diameter of conductors

~24-22 AWG (0.50-0.65 mm)

Number of ports


Height, U


Connector material in connector

Phosphor bronze

Contact coating material

Gold (50 rcd) over nickel (~ 100 rcd)

Layout diagram

T568A / B

IDC Contact material

Phosphor bronze

IDC coating material

Tin (100 micro-inches)

Material of the supporting structure

Steel 1.5 mm

Number of cable connections

Not less than 750

Connector type

RJ45 / 8P8C

Insulation resistance

Not less than 500 M (at constant voltage of 100 V)


19’’ Cabinet or rack


All ports are numbered, there are additional labeling area

Type of IDC contacts (seal)


Contact resistance, μΩ

Not more than 20

Depth in rack (with organizer), mm

123 mm

Basic equipment

Patch panel 1
Cable organizer 1
Installation instruction 1
Screed kit 48
Scew washer nut 4