Telephone patch panel, 50 ports, 19 ", 1U, category 3

Order table

P/N Cat. Number of ports Height, U Individual package Freight package To compare Add to cart
Dimensions, mm Weight, kg Quantity Dimensions, mm Weight, kg
NMC-RP50UC3-1U-BK 3 50 1 510x155x75 1,55 10 pcs. 515x380x320 16,9


Patch panels (patch panels) are designed for mounting cables in various subsystems of the SCS and connecting the individual network components to each other using patch cords. The NIKOMAX NMC-RP50UC3-1U-BK telephone patch panel is designed for mounting in a 19 ”cabinet or rack. With a standard height of 1U, the panel holds 50 Category 3 RJ45 / 8P6C ports, which saves considerable space inside the cabinet. Unlike most telephone panels, the NMC-RP50UC3-1U-BK supports three-pair operation, which is necessary for the operation of certain types of digital PBXs. For ease of administration, all ports are numbered, and there are additional marking sites. The patch panel is made in the classic black color. Universal IDC contacts 110 / KRONE are located on the back side of the panel, on a horizontal substrate. This design makes it much more convenient to distribute multi-pair cables. The patch panel is made according to the USOC standard. For fixing the cables has a built-in organizer.

Key features

1.5 mm steel housing

RJ45 / 8P6C connectors: support for work in three pairs, which may be necessary for the operation of certain types of digital PBX 6 mcd gold-plated contacts: at least 750 cycles of connecting cords

High port density: 50 RJ45 / 8P6C connectors in a 1U package

Built-in cable organizer

Universal IDC contacts 110 / Krone (110 type knives are recommended) To improve the convenience of the installation, the contact blades are provided with slots that firmly hold the wires in the routing process

For easy termination, the contacts are numbered in order.

All ports are numbered




Bandwidth, MHz


Connection style

Shielded (grounded)


Exceeds standards: ISO / IEC 11801, EN 50173 and TIA / EIA-568

Supported applications

10BASE-T, ATM-25, ATM-51

Temperature ranges

Storage -40 to +70 ° C. Installation 0 to +50 ° C. Operating -10 to +60 ° C

Individual packing

Cardboard box


1 year

Number of ports


Height, U


Connector type


Connector material in connector

Phosphor bronze

Contact coating material

Gold (6 micro-inches) over nickel (100 micro-inches)

Number of cable connections

Not less than 750

Type of IDC contacts (seal)


Layout diagram

Маркировка контактов от 1 до 6

IDC Contact material

Phosphor bronze

IDC coating material

Tin (100 micro-inches)

Plastic material

High-strength, non-flammable, meets UL94V-0


All ports are numbered, there are additional marking areas


19’’ Cabinet or rack

Depth in rack, mm


Material of the supporting structure

Steel 1.5 mm



Insulation resistance

Not less than 500 megohms (at a constant voltage of 100 V)

Maximum load-bearing capacity

Up to 1000 V, 60 Hz for 1 minute

Contact resistance, μΩ

Not more than 20

IDC Contact resistance, μΩ

Not more than 2.5

Permissible diameter of conductors

~26-24 AWG (0,40-0,51 мм)

Basic equipment

Patch panel 1
Ground wire 1
Cable tie 50
Screw-washer-nut 4
Installation instructions 1