NMC-WO1UE2-FT-ST-WT

Wall outlet, Unshielded, Cat.6, 1 port, With FT series module

NMC-WO1UE2-FT-ST-WT, Cat. 6
NMC-WO1UE2-FT-ST-WT, Cat. 6

Order table

P/N Category Number of ports Individual package Collective package Freight package To compare Add to cart
Volume, m3 Weight, kg Quantity Dimensions, mm Weight, kg Quantity Dimensions, mm Weight, kg
NMC-WO1UE2-FT-ST-WT 6 1 0.00009 0.04 50 pcs. 250x190x210 2.3 200 pcs. 515x400x230 9.8

Description

Surface Mount Box are an integral part of horizontal subsystems of SCS and are intended for connection of terminal equipment in workplaces. Structurally, the sockets can be made in two versions: as a complete solution with soldered RJ45 ports and IDC connectors and in the form of a plastic casing into which Keystone plug-in modules are separately installed. These outlets are equipped with NIKOMAX Fast Termination («FT» series) Keystone Jacks and represent a solution completely ready for installation. The «FT» series Keystone modules are designed specifically for use with the NMC-FT-TOOL, which allows you to terminate the module in one push. More information about the tool and «FT» modules you can read in the relevant sections. On the casings of the outlets there are additional break-out windows allowing cables to be brought from either side. For ease of administration on all covers there are marking areas and windows for the installation of colored icons. With plug-in modules, you can always change the configuration of the outlets. Any other Keystone format modules can be installed there in any desired configuration.

Key features

Sockets can be mounted on a wall with a double-sided adhesive base or with two screws

NIKOMAX FT Series Shielded Modules are compatible with the NMC-FT-TOOL tool for fast cable termination

Universal mount, compatible with any NIKOMAX Keystone modules

High-strength, non-flammable, meets UL94V-0

Anti-dust protective shutters

The cover is opened on the side, which makes it easy and convenient to dismantle the outlet

Colored icons for marking

Characteristics

Category

6
Bandwidth, MHz

250
Connection style

Unshielded
Compliance

Exceeds the requirements of the standards: ISO / IEC 11801, EN 50173 and ANSI / TIA -568-C.2
Supported applications

10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 10G-BASE-T (For Cat. 6), ATM-25, ATM-51, ATM-155, 100VG-AnyLan, TR-4, TR-16 Active, TR-16 Passive
Temperature ranges

Storage -40 to +70 ° C. Installation 0 to +50 ° C. Operating -10 to +60 ° C
Individual packing

Plastic bag
Warranty

5 years - extended; 25 years - as part of the NIKOMAX SCS certified
Connector type

RJ45/8P8C
Connector material in connector

Phosphor bronze
Contact coating material

Gold (50 micro-inches) Nickel (100 micro-inches)
Number of cable connections

Not less than 750 times
Layout diagram

T568A/B
IDC Contact material

Phosphor bronze
IDC coating material

Tin (100 micro-inches)
Installation

Wall
Insulation resistance

At least 500 MΩ (at a constant voltage of 100 V)
Maximum load-bearing capacity

Up to 1000 V, 60 Hz for 1 minute
Contact resistance, μΩ

Not more than 20
IDC Contact resistance, μΩ

Not more than 2.5
Permissible diameter of conductors

~24-22 AWG (0.50-0.65 mm)
Dimensions (WxHxD), mm

40x70x30
Number of ports

1
Installed modules

NMC-KJUE2-FT-MT
Type of IDC contacts (seal)

FT-TOOL fast termination tool or 110 / KRONE Type
Module housing material

High-strength, non-flammable plastic, meets UL94V-0
Socket housing material

Non-combustible plastic, meets UL94V-0
Color of the case

White

Basic equipment

Socket housing 1
Module + Cover 1
Labels for marking 1
Set of colored icons 2
Sticky base 1
Screws 2
Installation instructions 1

Downloads

NMC-WOxUx2-FT-ST-WT