Plugs and boots

Plugs and boots

Article 27 December 2021

For cables with very thick wire

Meet our new NIKOMAX shielded plugs specially designed for cat.6 and cat.6a solid cables of the same construction and two new models of protective boots!

What are their main features? Let’s dig a little deeper and start with plugs.


Basic information

Our product line expanded with two new plugs, specifically with NMC-RJ88RZ50SE3-T-100 (cat.6) and NMC-RJ88RZ50SA3-T-100 (cat.6а). The plugs have shielded construction, universal type, and, of course, are suitable for termination of both solid and stranded cables during patch cords production. Moreover, 50 µinch of gold plating prolongs patch cord service life and protects copper contacts from oxidation as well.

Detached tail

The specially designed detached tail is the unique feature of the brand-new NIKOMAX plugs. That enables crimping the shield outside the plug's body, thus increasing the permissible outer diameter these boys can deal with and allowing the termination of shielded cables with very thick wire.

Protective boots

Basic information

On the other hand, we have our new boots. The first one is NMC-RJBOOT75T-TR-100, specially designed for above mentioned plugs with an inner diameter of 7,5 mm. The second one, his younger brother – NMC-RJBOOT65S-TR-100, with an inner diameter of 6,5 mm, is suitable for thicker Cat. 5e shielded cables. Both are made from transparent polyvinyl chloride (PVC) and match perfectly with cables of any color! And, of course, a special boot’s design allows maintaining a safe cable bend radius and provides latch protection. All of that exponentially prolongs jack’s service life and improves the convenience of system maintenance.


As for the packaging, it’s pretty standard – the plugs and boots are delivered in a branded polyethylene bag with an informative sticker on the backside by 100 pcs in each.